HEAVY AND GENERAL CONSTRUCTION SERVICES

Manitowoc, Caterpillar, John Deere, Paccar - Global Affiliations

President - Tariq Robinson

CONSTRUCTION SHOP FACILITIES

U.S. Highway-17 @ N.C. Highway-32 - Edenton, NC

ACRE PERCENTAGE

Construction Shop ([4] Bays 20' Wide x 100' Length)

0.19% of a Acre

Towing & Recovery Shop (Rotators Bay, Carriers Bay, Wreckers Bay & Servicing Bay (12' Wide x 120' Length)

0.14% of a Acre

Dispatching & Estimation Office (100' Wide x 100' Length)

0.23% of a Acre

CONSTRUCTION, SHOP & OFFICE BUSINESS ADDRESS

Street - U.S. Highway-17 @ N.C. Highway-32
City, State & Zip Code - Edenton, NC 27932
Facility Size -
- Construction Shop - 10,000 Sq. Feet
- Towing Repair Shop - 10,000 Sq. Feet
- Dispatching & Estimation Office - 10,000 Sq. Feet
Lot Size - 52.93 Acres
- Construction Lot - 25 Acres
- Towing Lot - 25 Acres
- Dispatching & Estimation Lot - 12.93 Acres

LOGISTICS GEOGRAPHICS

Shop Size - 10,000 Square Feet

Lot Size - 25 Acres

Amount of Drive-in Doors - 3
Clear Ceiling Height - 30’

Nearest Regional Airport - Northeastern Airport (KEDE)

Runway 01/19 - 6,001’ Length x 100’ Width
Lat/Long -
- 36-01-429240n 076-34-11.1630W
- 36-01.715400N 076-34.186050W
- 36.0285900-76.5697675 (Estimated)
Elevation - 18.7’ / 5.7m (Surveyed)
Variation - 10W (2000)
From City - 3 Miles SE of Edenton, NC
Time Zone - UTC - 4 (UTC - 5 During Standard Time)
Control Tower - No
ARTCC - Washington Center
FSS - Raleigh Flight Service Station
NOTAMs Facility - EDE (NOTAM-D Service Available)
Attendance - 0800-1700
Wind Indicator - Lighted
Segmented Circle - Yes
Lights - PAPI RYS 01 & 19 OPER CONT.. ACTVT MIRL RY 1/19 AND REIL RYS 01 & 19 - CTAF
Beacon - White - Green (Lighted Land Airport) Operate Sunset to Sunrise
Nearby Radio Navigation Aids -
- ECGr241/23.5 Elizabeth City VOR DME (Freq. 115.75) / (Var. 07W)
- CVIr154/25.3 Cofield Vortac (Freq. 114.60) / Var. 09W)

Nearest International Airport - Norfolk International Airport (Delta Airlines)

Nearest Seaport - Port Virginia (Hampton Roads)

Size - 1,864 Acres
Berth Space - 19,885 Linear Feet
Harbor Depth - 55’ (Deepest on East Coast)
TEU Annually - 3,200,000
Channels - 55’ Underway
Terminals - 6
Rail - 30 Miles on-Dock Rail
Two-Way Traffic - The Port is on Track to Become the Widest and Deepest on The East Coast Allowing Two-Way Traffic of Ultra-Large Container Vessels
Expansion: Currently undergoing a Major Expansion Project
Intermodal Network - One of the Largest Intermodal Networks on The East Coast

Nearest Intermodal & Box Car Rail Yard - Norfolk Southern Portlock Yard (Chesapeake, VA)

ADDRESS: 2704 Josef Theurer Lane in Chesapeake, VA
PHONE: (757)275-1274
- Gate Hours 24/7
- Lift Hours:
  - Monday - Friday: 6:30am to 8:00pm
  - Saturday - Sunday: 7:00am to 5:00pm

Nearest Autorack Rail Yard - Norfolk Southern Automotive Distribution Center in Petersburg, VA

ADDRESS: 999 Wagner Road in Petersburg, VA
PHONE:
- Functions - The center specializes in the distribution and logistics of Automotive products, playing a key role in the automotive supply chain
- Specifics: It has a capacity of 1,893 Vehicles and can accommodate 60 Railcars
- Services: Norfolk Southern provides various services for the automotive industry. Including finished vehicles distribution and parts transportation
- Hours of Operation: 24/7

Nearest Highways (Within 20 Miles)-

U.S. Route -17
U.S. Route - 64
U.S. Route - 13
N.C. Route - 45

Nearest Interstates (Within 68 Miles)-

Interstate-95
Interstate-64
Interstate-664

Reliable Construction Solutions

NAOMI JEANETTE ROBINSON LOGISTICS GROUP

1444 Jefferys Road #580

Rocky Mount, NC 27804

Office: (252)877-2108

Fax (252)877-2117

Cell (252)903-3751

Toll Free (844)415-3410

njrtruckingllc@gmail.com - Trucking

CATERPILLAR AND STALLANTIS AUTOMOTIVE GROUP & PETERBILT

WELCOME TO NAOMI JEANETTE ROBINSON GROUP EXCAVATION DIVISION

NAOMI JEANETTE ROBINSON GROUP

133 U.S. Route-13

Windsor, NC 27983

Toll Free Phone# (844)415-3410

Office# (252)877-2108

Cell# (252)903-3751

Fax# (252)877-2117

Toll Free# (844)415-3410

Naomi Jeanette Robinson Logistics Group is pleased to submit this recommendation of development with the objective of:

Heavy Excavation
Marine Dredging Excavation
General Excavation
Pipe Laying
Welding Fabrication
Fabrication

In the geographical location in which employment will be performed in North Carolina, South Carolina, Virginia, Maryland, Georgia and Tennessee Locations.

In accomplishing our goals for a pervasive refashion America. We have an intelligent foresight, a business image that portrays flourishing American existence.

Naomi Jeanette Robinson Logistics Group has an ambition to improve the customer experience through standardization, and time.

Naomi Jeanette Robinson Logistics Group is a sole proprietorship company which will be owned and operated by Mr. Tariq Robinson. The business has journeying contracts with reliable clients. These Major companies that are affiliated with Naomi Jeanette Robinson Logistics Group gaining prosperity are located in the southeastern states.

The bargain agreement according to the delegates states. The prevailing remuneration is tax money from trucking companies. Our demand will be greater than charitable income. We will look to make our prevailing remuneration from custom homes builders, such as Americans Home Store, Toll Brothers and Mid-Atlantic.

Naomi Jeanette Robinson Logistics Group will be introduced into the construction industry by Sub-Contractor to Crisdel Group

Segment presentation illustration through Peterbilt 589, Talbert 85-Ton 3+3+3 Rear Steer Lowboy, Dodge Durango SRT, Jeep Wagoneer S and Ram 1500 REV Tungsten Trim, Ram 3500 Limited Mega Cab 4x4 6'4" Box, Ram 5500 Chassis Cab with Welding and Mechanic Body and as company vehicles of choice for Excavation Details and Pulling Small Equipment

N.J.R. Logistics Group construction segment presentation illustration through sub-contractor entrance, to generate growth and expand our dominion in the industry.

NAOMI JEANETTE ROBINSON GROUP PREP FOR CRANES

LAND PREP FOR HAUL ROAD TO WATER EDGE

The Robinson's Estate Sub-Division

3047 Bass Landing Road

Edenton, NC 27932

30.41 Acres

Property Length - 1,080'

Property Width - 1,120'

Cell# (252)903-3751

Fax# (252)877-2117

Toll Free# (844)415-3410

PROPERTY PREP FOR MOBILE TOWER CRANE

EQUIPMENT NEEDED

(4) Caterpillar 745 Articulated Trucks

(3) Caterpillar 657 Earth Scraper

(1) Caterpillar D11 Dozer

(1) Caterpillar 395 Excavator

(1) Caterpillar 395 Long Reach Excavator

(1) Caterpillar 825 Soil Compactor

REQUIREMENTS

1st STEP: The Cat 657 Earth Scraper will start on the property line and go down 1' and move inland and keep doing that until 5' is cut
2nd STEP; The Dozer will get behind Earth Mover Pushing Them until the Water Table is reach
3rd STEP: The Cat 825 Soil Compactor will beat the soil to draw the water to the surface to make density level rises when backfilling and tighten the soil with the sun beating down on soil evaporating the water the soil for the haul road and the Crane to drive on
4th STEP: The Cat 395 Excavator will work with the Cat 657 in Bringing the dirt back by loading the Cat 745 Articulated trucks
5th STEP: The CatD11 Dozer will back drag the dirt to work the moisture into the soil for compaction
6th STEP: The Cat 825 Soil Compactor will work daily beating the soil for 2 weeks without no traffic on the property to allow the earth to hardening the land

STORM WATER RETENTION POND

FLASH FLOODING PREP ON PROPERTY

EQUIPMENT NEEDED

(3) Caterpillar 657 Earth Scraper

(1) Caterpillar D11 Dozer

(1) Caterpillar 395 Excavator

(1) Caterpillar 825 Soil Compactor

REQUIREMENTS

1st STEP: The Cat 395 Will start in the center of retention pond digging down to water tabe a 50'x50' hole throwing the dirt into Cat 657 to start the grade for the the Earth Srapper to match in a circle around the hole to a 300' x 300' Pit
2nd STEP; The Cat D11 Dozer will jump into the hole to make level. No Compaction Needed
3rd STEP: The Cat 825 will Pound around the pond> The Hole will stay Open until we can get the Crane onsite

LOCATING CITY OF EDENTON UTILITIES CONNECTION

LOCATING CITY UTILITIES TO ESTIMATE THE LIMITED AMOUNT OF ELBOWS OR "T" PIPE CONNECTION ON PROPERTY

EQUIPMENT NEEDED

(1) Caterpillar 395 Excavator

(1) Caterpillar 825 Soil Compactor

REQUIREMENTS

1st STEP: The Cat 395 Cut Down a 4' trench that will be 5' Wide at edge of property to have the Water line into the house. The 5' wide trench will allow "T" to my Daughter and Son House. I will have the trench open. until i can put the pipe laying into my house plans
2nd STEP; I will then place the pipe in the center of the trench at the water table. I will place Shut-Off Valve every 500' to place the water treatment Filters if the water is harsh when showering or drinking. Need to have the treatment 1,500' if required

SURVEYING THE PROPERTY

LOCATING CITY OF EDENTON UTILITIES CONNECTION

SURVEYING THE PROPERTY FOR HOUSES LOCATION

EQUIPMENT NEEDED

(1) Bosch 4000-ft Green Self-Leveling Rotary Laser Level Kit Item #5054097 / Model #GRL4000-90CHVGK

(9) 12 -Pack 36.0-in Wood Multipurpose Landscape Stake Item #960068 / Model #318496

(7) Hanes 330-ft x 36-in Black North Carolina DOT Silt fence

Item #2296178 / Model #43037

(1) Sharpie 5 -Pack Fine Black Marker Item #326820 / Model #30665PPA

(10) Project Source 1-in W x 200-ft L Orange Caution Polyethylene Safety Tape Item #576278 / Model #ST576278

(1) Plott Carta Bluetooth Mapping 12.5-in Measuring Wheel / Item #1638501 / Model #906232

REQUIREMENTS

1st STEP: Setup Bosch 4,000' Green Self-Leveling Rotary Laser to get grade of center of road
2nd STEP; I will get the measurement to the rear of property (Roughly 1,000' Length
3rd STEP: To obtain a 20 to 1 Slope to get water off the property at 2' per second
4th STEP: To obtain the best location for each home with privacy and roads to each house
5th STEP: To locate the Retention Manhole and Transfer Manhole Location
6th STEP: To stake the jobsite in 10,000 sq. feet areas
7th STEP: To stake the Driveway and Haul Roads to Each House for cutting Roads for the Min Excavator to Auger Down 6" to Get Soil Samples for the concrete stilits construction

NAOMI JEANETTE ROBINSON GROUP EXCAVATION DIVISION PREP FOR T

The Robinson’s Estate Sub-Division

Custom Homes Building on Stilts Design

3047 Bass Landing Road

Edenton, NC 27932

Property Length - 1,080’

Property Width - 1,120’

30.31 Acres Lot

Liebherr MK Mobile Tower Crane Prep Design for Excavation Crew

MAIN HAUL ROAD DIMENSIONS

Length - 1,080’

Width - 30’

Square Yards - 3,600 sq. yards

Depth - 12”

Tonnage - 2,160 Tons

MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’

Width - 30’

Depth - 10”

Square Yards - 200 sq. yards

Depth - 10”

Tonnage - 100 Tons

# of Outriggers - 4

Crane Operating Weight - 120,000 lbs.

Download PDF

CRANE SETUP - THE EXCAVTION FOR THE ROBINSON'S ESTATE

Helicopter Pad on Stilts

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’
Width - 30’
Depth - 10”
Square Yards - 200 sq. yards
Depth - 10”
Tonnage - 100 Tons
# of Outriggers - 4
Crane Operating Weight - 120,000 lbs.

LIEBHERR MK140-5.1E TOWER CRANE SETUP LOCATION

Work Piece Length - 50’
Work Piece Width - 50’
Crane Distance From Work Piece - 10’
Crane Outriggers Location - 11.54’ From Edge of Work Piece (Both Sides)

LIEBHERR MK140-5.1E TOWER CRANE RADIUS SET UP

Crane Operating Length - 52’6”
Crane Operating Width - 26’11”
Max. Lift Radius - 100’
Max. Lift Capacity - 5,780 lbs.

MATERIAL LIFTING

¾” OSB Plywood Bundle - 3,300 lbs.
8”x8”x16’ Wood Beams Bundle - 5,280 lbs.
Helipad Marketing Paint Pallet - 280’
Helipad Lighting Crate - 2,845 lbs.

Infinity Pool on Stilts

River Pool & Spas

Warsaw, VA

Model - C40

Dimensions

Length - 40’
Width - 16’
Low Side Height - 3.80”
Deep Side Height - 6.21”

MAIN HAUL ROAD DIMENSIONS

Length - 1,080’
Width - 30’
Square Yards - 3,600 sq. yards
Depth - 12”
Tonnage - 2,160 Tons

MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’
Width - 30’
Depth - 10”
Square Yards - 200 sq. yards
Depth - 10”
Tonnage - 100 Tons
# of Outriggers - 4
Crane Operating Weight - 120,000 lbs.

LIEBHERR MK140-5.1E TOWER CRANE SETUP LOCATION

Work Piece Length - 40’
Work Piece Width - 16’
Crane Distance From Work Piece - 10’
Crane Outriggers Location - 6.54’ From Edge of Work Piece (Both Sides)

LIEBHERR MK140-5.1E TOWER CRANE RADIUS SET UP

Crane Operating Length - 52’6”
Crane Operating Width - 26’11”
Max. Lift Radius - 60’
Max. Lift Capacity - 10,740 lbs.

MATERIAL LIFTING

James Hardie ½” Fiber Cement Backer Board - 3,945 lbs
Trex Enhance Natural 20’ Composite Decking Boards - 2,912 lbs.
9’x9’x3’ Spa - 550lbs.
8”x8”x16’ Wood Beams Bundle - 5,280 lbs.
40’ x 17’ Fiberglass Pool Shell - 5,000 lbs.

Hobby Warehouse on Stilts

Dimensions

Length - 100’

Width - 100’

Height - 30’

MAIN HAUL ROAD DIMENSIONS

Length - 1,080’
Width - 30’
Square Yards - 3,600 sq. yards
Depth - 12”
Tonnage - 2,160 Tons

MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’
Width - 30’
Depth - 10”
Square Yards - 200 sq. yards
Depth - 10”
Tonnage - 100 Tons
# of Outriggers - 4
Crane Operating Weight - 120,000 lbs.

LIEBHERR MK140-5.1E TOWER CRANE SETUP LOCATION

Work Piece Length - 100’
Work Piece Width - 100’
Crane Distance From Work Piece - 10’
Crane Outriggers Location - 36.54’ From Edge of Work Piece (Both Sides)

LIEBHERR MK140-5.1E TOWER CRANE RADIUS SET UP

Crane Operating Length - 52’6”
Crane Operating Width - 26’11”
Max. Lift Radius - 150’
Max. Lift Capacity - 3,640 lbs.

MATERIAL LIFTING

¾” OSB Plywood Bundle - 3,300 lbs.
8”x8”x16’ Wood Beams Bundle - 5,280 lbs.
2”x12”x16’ Bundle - 5,203 lbs.
2”x4”x16’ Bundle - 7,372 lbs.
4’x12’x½” Sheetrock Bundle - 2,176 lbs.
0.33 Cu. Yards of Bulk Bag of Sand - 1,200 lbs.
9 Cu. Feet Bulk Bag of Gravel - 900 lbs.
Romex 14/3 Southwire Roll Bundle - 2,045 lbs.

Bowling Lane on Stilts

Dimensions

Length - 100’

Width - 50’

Height - 12’.

MAIN HAUL ROAD DIMENSIONS

Length - 1,080’
Width - 30’
Square Yards - 3,600 sq. yards
Depth - 12”
Tonnage - 2,160 Tons

MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’
Width - 30’
Depth - 10”
Square Yards - 200 sq. yards
Depth - 10”
Tonnage - 100 Tons
# of Outriggers - 4
Crane Operating Weight - 120,000 lbs.

LIEBHERR MK140-5.1E TOWER CRANE SETUP LOCATION

Work Piece Length - 100’
Work Piece Width - 50’
Crane Distance From Work Piece - 10’
Crane Outriggers Location - 11.54’ From Edge of Work Piece (Both Sides)

LIEBHERR MK140-5.1E TOWER CRANE RADIUS SET UP

Crane Operating Length - 52’6”
Crane Operating Width - 26’11”
Max. Lift Radius - 150’
Max. Lift Capacity - 3,640 lbs.

MATERIAL LIFTING

¾” OSB Plywood Bundle - 3,300 lbs.
8”x8”x16’ Wood Beams Bundle - 5,280 lbs.
2”x12”x16’ Bundle - 5,203 lbs.
2”x4”x16’ Bundle - 7,372 lbs.
4’x12’x½” Sheetrock Bundle - 2,176 lbs.
Bowling Lanes Pair of Pinsetters - 5,100 lbs.
Bowling Lane Flooring Bundle - 4,500 lbs.
Romex 14/3 Southwire Roll Bundle - 2,045 lbs.

Basketball & Volleyball Court on Stilts

Dimensions

Length - 100’

Width - 50’

MAIN HAUL ROAD DIMENSIONS

Length - 1,080’
Width - 30’
Square Yards - 3,600 sq. yards
Depth - 12”
Tonnage - 2,160 Tons

MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’
Width - 30’
Depth - 10”
Square Yards - 200 sq. yards
Depth - 10”
Tonnage - 100 Tons
# of Outriggers - 4
Crane Operating Weight - 120,000 lbs.

LIEBHERR MK140-5.1E TOWER CRANE SETUP LOCATION

Work Piece Length - 100’
Work Piece Width - 100’
Crane Distance From Work Piece - 10’
Crane Outriggers Location - 11.54’ From Edge of Work Piece (Both Sides)

LIEBHERR MK140-5.1E TOWER CRANE RADIUS SET UP

Crane Operating Length - 52’6”
Crane Operating Width - 26’11”
Max. Lift Radius - 150’
Max. Lift Capacity - 3,640 lbs.

MATERIAL LIFTING

¾” OSB Plywood Bundle - 3,300 lbs.
8”x8”x16’ Wood Beams Bundle - 5,280 lbs.
Sorbus 96 sq. feet Wood Grain Floor Foam Interlocking Mat Tiles Bundle - 5,045 lbs.
8”x8”x16” Cored Concrete Block Bundle - 4,425 lbs.
Aozigmy 300-watt LED Parking Lot Lights Bundle- 725 lbs.
Romex 14/3 Southwire Roll Bundle - 2,045 lbs

Greenhouse on Stilts

Dimensions

Length - 100’

Width - 25’

MAIN HAUL ROAD DIMENSIONS

Length - 1,080’
Width - 30’
Square Yards - 3,600 sq. yards
Depth - 12”
Tonnage - 2,160 Tons

MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’
Width - 30’
Depth - 10”
Square Yards - 200 sq. yards
Depth - 10”
Tonnage - 100 Tons
# of Outriggers - 4
Crane Operating Weight - 120,000 lbs.

LIEBHERR MK140-5.1E TOWER CRANE SETUP LOCATION

Work Piece Length - 100’
Work Piece Width - 100’
Crane Distance From Work Piece - 10’
Crane Outriggers Location - 36.54’ From Edge of Work Piece (Both Sides)

LIEBHERR MK140-5.1E TOWER CRANE RADIUS SET UP

Crane Operating Length - 52’6”
Crane Operating Width - 26’11”
Max. Lift Radius - 50’
Max. Lift Capacity - 13,400 lbs.

MATERIAL LIFTING

¾” OSB Plywood Bundle - 3,300 lbs.
8”x8”x16’ Wood Beams Bundle - 5,280 lbs.
Green House Kit - 2,500 lbs.
Romex 14/3 Southwire Roll Bundle - 2,045 lbs.

Main House on Stilts

Main House Ramp Entrance (From Point of Upgrade to Garage on Stilts Level Entrance)

Dimensions

Length - 100’

Width - 150’

MAIN HAUL ROAD DIMENSIONS

Length - 1,080’
Width - 30’
Square Yards - 3,600 sq. yards
Depth - 12”
Tonnage - 2,160 Tons

MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’
Width - 30’
Depth - 10”
Square Yards - 200 sq. yards
Depth - 10”
Tonnage - 100 Tons
# of Outriggers - 4
Crane Operating Weight - 120,000 lbs.

LIEBHERR MK140-5.1E TOWER CRANE SETUP LOCATION

Work Piece Length - 100’
Work Piece Width - 150’
Crane Distance From Work Piece - 10’
Crane Outriggers Location - 61.54’ From Edge of Work Piece (Both Sides)

LIEBHERR MK140-5.1E TOWER CRANE RADIUS SET UP

Crane Operating Length - 52’6”
Crane Operating Width - 26’11”
Max. Lift Radius - 150’
Max. Lift Capacity - 3,460 lbs.

MATERIAL LIFTING

¾” OSB Plywood Bundle - 3,300 lbs.
8”x8”x16’ Wood Beams Bundle - 5,280 lbs.
2”x12”x16’ Bundle - 5,203 lbs.
2”x4”x16’ Bundle - 7,372 lbs.
4’x12’x½” Sheetrock Bundle - 2,176 lbs.
James Hardie ½” Fiber Cement Backer Board - 3,945 lbs
Romex 14/3 Southwire Roll Bundle - 2,045 lbs.

Main House Ramp Entrance (From Point of Upgrade to Garage on Stilts Level Entrance)

Dimensions

Length - 350’

Width - 50’

Square Feet - 17,500 sq. feet

MAIN HAUL ROAD DIMENSIONS

Length - 1,080’
Width - 30’
Square Yards - 3,600 sq. yards
Depth - 12”
Tonnage - 2,160 Tons

MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’
Width - 30’
Depth - 10”
Square Yards - 200 sq. yards
Depth - 10”
Tonnage - 100 Tons
# of Outriggers - 4
Crane Operating Weight - 120,000 lbs.

LIEBHERR MK140-5.1E TOWER CRANE SETUP LOCATION

Work Piece Length - 350’
Work Piece Width - 50’
Crane Distance From Work Piece - 10’
Crane Outriggers Location - 161.54’ From Edge of Work Piece (Both Sides)

LIEBHERR MK140-5.1E TOWER CRANE RADIUS SET UP

Crane Operating Length - 52’6”
Crane Operating Width - 26’11”
Max. Lift Radius - 165’
Max. Lift Capacity - 3,660 lbs.

MATERIAL LIFTING

¾” OSB Plywood Bundle - 3,300 lbs.
8”x8”x16’ Wood Beams Bundle - 5,280 lbs.
Concrete Bucket, Lightweight Round Gate, 1 Cubic Yard Capacity - 440 lbs.
C40 Fibre Concrete for Floor of Ramp (2,592 Cu. yards) - [One Cubic Yard] - 4,040 lbs. + Concrete Bucket = 4,490 lbs.
½”x20’ Steel #4 Rebar Bundle - 2,605 lbs.

Daughter’s & Son’s House

Main House Ramp Entrance (From Point of Upgrade to Garage on Stilts Level Entrance)

Home Office & Truck Garage w/20-Ton Bridge Crane

Dimensions

Length - 74’

Width - 55’

Square Feet - 4,070 sq. feet

MAIN HAUL ROAD DIMENSIONS

Length - 1,080’
Width - 30’
Square Yards - 3,600 sq. yards
Depth - 12”
Tonnage - 2,160 Tons

MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’
Width - 30’
Depth - 10”
Square Yards - 200 sq. yards
Depth - 10”
Tonnage - 100 Tons
# of Outriggers - 4
Crane Operating Weight - 120,000 lbs.

LIEBHERR MK140-5.1E TOWER CRANE SETUP LOCATION

Work Piece Length - 74’
Work Piece Width - 55’
Crane Distance From Work Piece - 10’
Crane Outriggers Location - 23.54’ From Edge of Work Piece (Both Sides)

LIEBHERR MK140-5.1E TOWER CRANE RADIUS SET UP

Crane Operating Length - 52’6”
Crane Operating Width - 26’11”
Max. Lift Radius - 70’
Max. Lift Capacity - 10,470 lbs.

MATERIAL LIFTING

¾” OSB Plywood Bundle - 3,300 lbs.
8”x8”x16’ Wood Beams Bundle - 5,280 lbs.
2”x12”x16’ Bundle - 5,203 lbs.
2”x4”x16’ Bundle - 7,372 lbs.
4’x12’x½” Sheetrock Bundle - 2,176 lbs.
James Hardie ½” Fiber Cement Backer Board - 3,945 lbs
Romex 14/3 Southwire Roll Bundle - 2,045 lbs.

Home Office & Truck Garage w/20-Ton Bridge Crane

Dimensions

Length - 50’

Width - 100’

Square Feet - 5,000 sq. feet

MAIN HAUL ROAD DIMENSIONS

Length - 1,080’
Width - 30’
Square Yards - 3,600 sq. yards
Depth - 12”
Tonnage - 2,160 Tons

MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR CRANE SETUP PAD

Length - 60’
Width - 30’
Depth - 10”
Square Yards - 200 sq. yards
Depth - 10”
Tonnage - 100 Tons
# of Outriggers - 4
Crane Operating Weight - 120,000 lbs.

LIEBHERR MK140-5.1E TOWER CRANE SETUP LOCATION

Work Piece Length - 50’
Work Piece Width - 100’
Crane Distance From Work Piece - 10’
Crane Outriggers Location - 36.54’ From Edge of Work Piece (Both Sides)

LIEBHERR MK140-5.1E TOWER CRANE RADIUS SET UP

Crane Operating Length - 52’6”
Crane Operating Width - 26’11”
Max. Lift Radius - 70’
Max. Lift Capacity - 10,470 lbs.

MATERIAL LIFTING

¾” OSB Plywood Bundle - 3,300 lbs.
8”x8”x16’ Wood Beams Bundle - 5,280 lbs.
Concrete Bucket, Lightweight Round Gate, 1 Cubic Yard Capacity - 440 lbs.
C40 Fibre Concrete for Floor of Ramp (2,592 Cu. yards) - [One Cubic Yard] - 4,040 lbs. + Concrete Bucket = 4,490 lbs.
½”x20’ Steel #4 Rebar Bundle - 2,605 lbs.
Double Girder 20-Ton Bridge Crane - 26,863 lbs. Shipping Weight

GE Vernova's 2.8 Mega Watts Wind Turbine

Home Office & Truck Garage w/20-Ton Bridge Crane

Caterpillar G3512E-1000 Gas Generator Set

Wind Turbine

GE Vernova’s 2.8 Mega Watts
Rotor Diameter - 416.67’
Hub Height - 291.9’

Foundations Dimensions

Length - 100’
Width - 100’
Depth - 15’
Concrete Requirement -
Foundation Weight - 2,250 Tons
Foundation Requirement - 30 Times Greater than the Structure Weight to Prevent a Topple or a Fall over

Sway Dimensions

Wind Speed - 100 mph
Tower Operating Weight - 150 Tons
Additional Force - 12,4 Tons of Weight
Sway Amount - 3’
Equilibrium - 75 Tons at dead center on Top
One Inch Sway at Top Will Create -833.34 lbs of Weight Force x 2 = 1,666.68 lbs of force
36” of Sway at Top will create 60,000 lbs. Of Force on the Direction of the Wind

LIEBHERR LTM 11200-9.1 ALL-TERRAIN HYDRAULIC CRANE MAIN HAUL ROAD DIMENSIONS

Length - 120’
Width - 60’
Square Yards - 800 sq. yards
Depth - 12”
Tonnage - 480 Tons

LIEBHERR LTM 11200-9.1 ALL-TERRAIN HYDRAULIC CRANE MATERIAL FOR HAUL ROAD FOR CRANE

Appalachian Mountains Blue-Hued Rock Crushed to 4” Stones
PSI Rating - 12,000 PSI Rating

DIMENSIONS AND MATERIAL FOR LIEBHERR LTM 11200-9.1 ALL-TERRAIN HYDRAULIC CRANE WALKING SETUP PAD

Length - 120’
Width - 60’
Depth - 10”
Square Yards - 800 sq. yards
Depth - 10”
Tonnage - 400 Tons
# of Outriggers - 4
Crane Operating Weight - 211,644 lbs.
Contact Outriggers Weight on Each - 52,911 lbs (1,356.70 PSI Capacity)

LIEBHERR LTM 11200-9.1 ALL-TERRAIN HYDRAULIC CRANE SETUP LOCATION

Work Piece Height - 291.9’
Work Piece Diameter Bottom - 15’
Work Piece Diameter Top - 10’
Work Piece Foundation Width - 100’
Crane Distance From Work Piece - 68’
Crane Outriggers Location - 22.5’ Out from Base Diameter (Both Sides)

LIEBHERR LTM 11200-9.1 ALL-TERRAIN HYDRAULIC CRANE RADIUS SET UP

Crane Operating Length - 66’
Crane Operating Width - 60’
Max. Lift Radius - 68’
Max. Lift Capacity - 138,000 lbs.

MATERIAL LIFTING

½”x20’ Steel #4 Rebar Bundle (5,000 Pieces Total) - 2,605 lbs.
GE Vernova’s 2.8 Mega Watts (4 Tower Sections) - 300,000 lbs.
GE Vernova’s 2.8 Mega Watts (3 Wind Blade Sections) - 60,000 lbs

Caterpillar G3512E-1000 Gas Generator Set

Home Office & Truck Garage w/20-Ton Bridge Crane

Caterpillar G3512E-1000 Gas Generator Set

Caterpillar G3512E-1000 Gas Generator Set

Kilowatts - 1184 kilowatts
Length - 15.18’
Width - 6'
Height - 7.4'
Weight - 25,015,9 lbs.

Pick Dimensions For Manitowoc 31000

Radius - 200' Min.
Length of Pick - 15.18'
Width of Pick - 6'
Height of Pick - 7.4'
Hook Block Position - 36" Boom Down From Front Edge + 91.08' Left or Right Pending Side of Hook Block
Shape of Pick - Cube (Edge Top 6' - Left Side 7.4' - Bottom 6' - Right 7.4'

Manitowoc 31000 Prep Setup Requirements

Crane Pad Length - 637.42'
Length of Crane Pad Walking Distance Available - 499.58' Walkable Distance to Work Piece
Crane Pad Width -140’
Crane Operating Weight - 2,600 Tons
Amount of Crawler Tracks - 4
Length of Each Crawler Tracks - 28.5'
Width of Each Crawler Track - 6'8"
Any Other Contact Points from Crane to Earth? If Yes Explain - The Counter Weight Has a Contact Wheels Under Counter Weight Tray
Amount of Total Contacts Points - 6
Amount of Pressure at each Contact Point - 433 Tons or More at Any Given Time
Pound Per Square Inch (PSI) - 2.26 Tons (PSI)
Crane Pad Depth - 36'
Foundation Weight - 17,847.76 Tons

Foundation Requirement - 6.87 Times Greater than the Crane Weight to Prevent a Topple or a Fall over

Manitowoc 31000 Prep Setup Location For OSHA Requirements

Pick Weight - 25,016 lbs.
50-Ton Hook Block Weight - 11,023 lbs.
(2) Spreader Beam 15-Ton - 1,788 lbs.
15-Ton Chain Sling - 29 lbs.
TOTAL PICK WEIGHT - 37,856 lbs.
Max. Radius From Center Property Stake (House) - 150' Radius
Max. Weight Capacity - 48,000 lbs. @ 70° Luffing Jib

Manitowoc 31000 Ground Bearing Pressure Under Crawler Prep Setup Location For OSHA Requirements

No Hook Load

Soft Ground - 80 psi / 11,520 psf
Hard Ground - 123 psi / 17,712 psf

With Load

Soft Ground - 121 psi / 17,424 psf
Hard Ground - 186 psi / 26,784 psf

At Critical Swing Angle

Soft Ground - 132 psi / 19,008 psf
Hard Ground - 202 psi / 29,088 psf

CATERPILLAR EXCAVATION DIVISION

CATERPILLAR 395 w/HIGH CAPACITY BUCKET EXCAVATOR

Naomi Jeanette Robinson Group chose this site for its 18.41 acres of flat cleared land with great access and visibility to U.S. Route-13 and U.S. Route-17

Naomi Jeanette Robinson Group Excavation Division refers to the large-scale removal of earth, rock, or other materials using heavy-duty Cat Machinery like excavators, dozers, and scrapers.

Naomi Jeanette Robinson Group Excavation Division commonly used in major construction projects for site preparation, deep foundation digging, mass grading, or cutting through rock

Naomi Jeanette Robinson Group fundamentally goals for the overall system to operate effectively

Large-volume earthmoving designed for major site preparation or site leveling.
Removing hard, compacted materials, which often requires heavy ripping equipment or blasting.
Deep excavation for building foundations, basements, or large infrastructure projects.
Narrow, deep excavation for utility lines, such as water, sewer, or gas, where depth exceeds width

Naomi Jeanette Robinson Group refers to the standard, widely used tools, machinery, and standardized procedures employed within specific fields in construction, manufacturing, or welding to perform tasks efficiently, accurately, and safely.

Hydraulic excavators, bulldozers, loaders, scrapers, and dump trucks are used.
Hydraulic breakers, cutters, and rippers are used to break apart dense materials.
Involves site clearing (removing vegetation), excavation (digging), hauling, and grading to the desired elevation

Heavy excavation involves large-scale earthmoving, deep digging, and complex site preparation for major infrastructure, while general excavation covers smaller, routine projects like foundation digging, trenches, and site grading. Key differences lie in scale, equipment size, and complexity

Heavy excavation involves moving massive quantities of earth over large areas, often for highway, dam, or large commercial projects. General excavation is generally smaller-scale, often focusing on single-site foundations, residential, or light commercial projects.
Heavy excavation requires large, high-capacity machinery like massive excavators, bulldozers, and heavy haul trucks. General excavation uses smaller or standard-sized backhoes, skid steers, and mini-excavators.
Heavy excavation often goes to significant depths and can involve specialized tasks like rock excavation (blasting) or deep muck removal. General excavation typically deals with shallower, simpler, or conventional depths.
General excavation frequently includes precise grading for specific structures or utility trenching. Heavy excavation often focuses on major topographical changes, such as clearing large plots, creating borrow pits, or large-scale cut-and-fill operations.
Heavy excavation requires specialized engineering for structural integrity (example retaining walls), while general excavation requires expertise in site-specific grading and standard footing work

The differences between Heavy and General Excavation is

Heavy Excavation: Highway construction, dam creation, large-scale mining, mass site grading for a new subdivision, and foundation for a skyscraper.
General Excavation: Residential foundation digging, trenching for sewer lines, installing a swimming pool, and basic site landscaping

LOCAL CATERPILLAR DEALER WE ARE ASSOCIATED WITH

GREGORY POOLE CAT

324 U.S. Route-158

Camden, NC 27921

(252)389-9086

www.gregorypoole.com

Walt Brandenburg

Phone:919-755-7021

Email: walter.brandenburg@gregpoole.com

Gregory Poole is your authorized Cat® equipment dealer in Eastern North Carolina. We are a one-stop shop for all your local heavy equipment needs. At Gregory Poole, we carry new, used, and rental equipment for a wide range of industries, including Construction, Agriculture, Marine Power, Electric Power Generation, Trucks, and more. We also provide all our customers with reliable service and support to keep your equipment running at its best.

Interested in learning more about our products and services? Call us at (866) 948-8988 or fill out the contact form below and we will get back to you within 1 to 2 business days!

HEAVY EXCAVATION PRACTICES FOR NAOMI JEANETTE ROBINSON GROUP

EXCAVATION (500' x 500' x 3') A 3' CUT OPERATION ESTIMATE

CATERPILLAR 657G (Pan) EARTH SCRAPER

DIRT MOVED HOURLY (cu. yards) - 220 cubic yards

DIRT MOVED DAILY (cu. yards) - 1,760 cubic yards

DIRT MOVED WEEKLY (cu. yards.) - 8,800 cubic yards

JOB TASK CUBIC YARDS - 27,228 Cubic Yards Task

TOTAL DAYS REQUIRED - 15.47 Days

CATERPILLAR D9 DOZER

DIRT MOVED HOURLY (cu. yards) - 1,068 cubic yards

DIRT MOVED DAILY (cu. yards) -8,544 cubic yards

DIRT MOVED WEEKLY (cu. yards.) - 42,720 cubic yards

JOB TASK CUBIC YARDS - 27,228 Cubic Yards Task

TOTAL DAYS REQUIRED - 3.18 Days

KOMATSU PC900LC EXCAVATOR

DIRT MOVED HOURLY (cu. yards) - 480 cubic yards

DIRT MOVED DAILY (cu. yards) -3,840 cubic yards

DIRT MOVED WEEKLY (cu. yards.) - 19,200 cubic yards

JOB TASK CUBIC YARDS - 27,228 Cubic Yards Task

TOTAL DAYS REQUIRED - 7.09 Days

CATERPILLAR 770 OFF-HIGHWAY TRUCK

DIRT MOVED HOURLY (cu. yards) -197 cubic yards

DIRT MOVED DAILY (cu. yards) - 1,576 cubic yards

DIRT MOVED WEEKLY (cu. yards.) - 7,880 cubic yards

JOB TASK CUBIC YARDS - 27,228 Days

TOTAL DAYS REQUIRED - 17.27 Days

DOZER WORKING AREA (300'L x 300'W) CUTS

DOZER WORKING AREA (300'L x 300'W) CUTS

SKID STEER w/DOZER BLADE (1" Cuts / [273 Cubic Yards Moved Daily])

CUBIC YARDS OF DIRT - 277

TYPE OF DIRT REMOVAL EQUIPMENT - Mini Excavator & (1) Ford F550 Dump Truck

WORKING WEEKS - 0.2Weeks

WORKING DAYS - 1.1 Days

WORKING HOURS - 8.8 Hours

SMALL DOZER (3" Cuts / 1,200 Cubic Yards Moved Daily])

CUBIC YARDS OF DIRT - 834

TYPE OF DIRT REMOVAL EQUIPMENT - Small Excavator & (1) Ford F750 Dump Truck

WORKING WEEKS - 0.14 Weeks

WORKING DAYS - 0.70 Days

WORKING HOURS - 5.6 Hours

MEDIUM DOZER (6" Cuts / 2,784 Cubic Yards Moved Daily])

CUBIC YARDS OF DIRT - 1,667

TYPE OF DIRT REMOVAL EQUIPMENT - Medium Excavator & (1) Pete 589 Dump Truck

WORKING WEEKS - 0.12 Weeks

WORKING DAYS - 0.60 Days

WORKING HOURS - 4.8 Hours

LARGE DOZER (12" Cuts / 8,544 Cubic Yards Moved Daily])

CUBIC YARDS OF DIRT - 3,334

TYPE OF DIRT REMOVAL EQUIPMENT - Medium Excavator & (1) Pete 589 Dump Truck

WORKING WEEKS - 0.08 Weeks

WORKING DAYS - 0.40 Days

WORKING HOURS - 3.2 Hours

EXCAVATOR WORKING AREA (100'L x 100'W) CUTS

EXCAVATOR WORKING AREA (100'L x 100'W) CUTS

MINI EXCAVATOR (10' Cuts)

AMOUNT OF DUMP TRUCKS REQUIRED - 186

CUBIC YARDS OF DIRT - 3,704 Cubic Yards

WORKING WEEKS - 6.4 Weeks

WORKING DAYS - 32 Days

WORKING HOURS - 256 Hours

SMALL EXCAVATOR (15' Cuts)

AMOUNT OF DUMP TRUCKS REQUIRED - 278

CUBIC YARDS OF DIRT - 5,556 Cubic Yards

WORKING WEEKS - 2.4 Weeks

WORKING DAYS -12 Days

WORKING HOURS - 96 Hours

MEDIUM EXCAVATOR (20' Cuts)

AMOUNT OF DUMP TRUCKS REQUIRED - 371

CUBIC YARDS OF DIRT -7,408 Cubic Yards

WORKING WEEKS - 2 Weeks

WORKING DAYS -10 Days

WORKING HOURS - 80 Hours

LARGE EXCAVATOR (25' Cuts)

AMOUNT OF DUMP TRUCKS REQUIRED - 463

CUBIC YARDS OF DIRT - 9,260 Cubic Yards

WORKING WEEKS - 0.5 Weeks

WORKING DAYS - 2.5 Days

WORKING HOURS - 20 Hours

LONG REACH EXCAVATOR (50' Cuts)

AMOUNT OF DUMP TRUCKS REQUIRED - 926

CUBIC YARDS OF DIRT - 18,519 Cubic Yards

WORKING WEEKS - 3 Weeks

WORKING DAYS - 15 Days

WORKING HOURS -120 Hours

EXCAVATOR WORKING AREA (100'L x 100'W) CUTS

PIPE LAYING (400' Length) ESTIMATION PLANNING

CUBIC YARDS OF DIRT ACCUMULATED

EQUIPMENT REQUIRED

WORKING WEEKS

WORKING DAYS

WORKING HOURS

MINI EXCAVATOR (400'L x 1'W x 3'D) 2' PVC ELECTRIC PIPE

44.45

Mini Excavator w/Blade + Ram 5500 Dump Truck

0.156 Weeks

0.78 Days

6.18 Hours

CATERPILLAR MARINE DREDGING EXCAVATION DIVISION

CATERPILLAR 395 LONG REACH EXCAVATOR

NAOMI JEANETTE ROBINSON LOGISTICS GROUP

1444 Jeffreys Road

Rocky Mount, NC 27804

Toll Free Phone# (844)415-3410

Office# (252)877-2108

Cell# (252)903-3751

Fax# (252)877-2117

Toll Free# (844)415-3410

Naomi Jeanette Robinson Group dredging excavation is the process of removing accumulated sediments, sand, gravel, or rock from the bottom of water bodies—such as lakes, rivers, and harbors—using specialized machinery. It serves to deepen navigation channels, manage contaminated materials, and support land reclamation or construction projects

Naomi Jeanette Robinson Group Goal for Dredging Excavation. It is generally a four-part operation: loosening the material, extraction (bringing it to the surface), transportation, and final disposal or placement.

Maintenance: Removing silt to keep shipping channels and ports deep enough for vessels.
Capital: Deepening waterways for new infrastructure or larger ships.
Environmental: Removing contaminated sediment to improve water quality and habitat.
Reclamation: Mining underwater sand/gravel to create new land.

The Different Types of Dredging

Mechanical Dredges: Use buckets or grabs (e.g., clamshell) to scoop material.
Hydraulic Dredges: Use suction to pump a mixture of water and sediment through a pipeline.

The Common Locations are Harbors, Ports, Shipping Lanes, River Channels, and Lakes. [

Dredging is essential for both economic activity—by ensuring passage for commercial ships—and environmental management

LOCAL CATERPILLAR DEALER WE ARE ASSOCIATED WITH

GREGORY POOLE CAT

324 U.S. Route-158

Camden, NC 27921

(252)389-9086

www.gregorypoole.com

Walt Brandenburg

Phone:919-755-7021

Email: walter.brandenburg@gregpoole.com

Interested in learning more about our products and services? Call us at (866) 948-8988 or fill out the contact form below and we will get back to you within 1 to 2 business days!

CATERPILLAR GENERAL EXCAVATION DIVISION

CATERPILLAR 307,5 MINI EXCAVATOR

NAOMI JEANETTE ROBINSON LOGISTICS GROUP

1444 Jeffreys Road

Rocky Mount, NC 27804

Toll Free Phone# (844)415-3410

Office# (252)877-2108

Cell# (252)903-3751

Fax# (252)877-2117

Toll Free# (844)415-3410

Naomi Jeanette Robinson Group General Excavation is the process of removing earth, rock, or other materials using machinery to prepare a site for construction, typically involving large-scale earthmoving, grading, and site preparation. It differs from specialized trenching by creating broad, open areas—wider than they are deep—for foundations, basements, or site leveling.

LOCAL CATERPILLAR DEALER WE ARE ASSOCIATED WITH

GREGORY POOLE CAT

324 U.S. Route-158

Camden, NC 27921

(252)389-9086

www.gregorypoole.com

Walt Brandenburg

Phone:919-755-7021

Email: walter.brandenburg@gregpoole.com

Interested in learning more about our products and services? Call us at (866) 948-8988 or fill out the contact form below and we will get back to you within 1 to 2 business days!