CUSTOM WELDING, HOT PRESSURE WASHING, PLASMA CUTTING, CARPENTRY & LIGHT DUTY REPAIRS MECHANIC SERVICE TRUCK

My Dad (James Curley Robinson - Farmer, Operating Engineer, Heavy Hauler, Diesel and Gas Engine Mechanic) taught me the basis of maintaining heavy equipment and vehicle servicing. In return though my education it has reduce my overhead expenses by obtaining this Mechanic Truck to service my trucks, trailer & equipment i operate and drive, just like my father driving a Ford 9000 and Kenworth W900L for heavy hauling.

 The mechanic truck has been designed to work from rear and inside man basket being lifted with a remote operating the crane in removing and restoring Booms, Generators, Oil Coolers and Blades,

The heavy-duty mechanic and cooling system truck is for mobile overheating and Maintenance of company equipment and vehicles. We do not have the capability to be a 24-Hour mobile repair contractor at the moment and not a passion of ours to become one in the industry at the moment. If we get calls that we can't maintain. I will direct you to a company that can handle your needs ASAP

Rocky Mount Radiator

Bryan Braswell - Owner

555 S. Wesleyan Blvd. (U.S. Route-301)

Rocky Mount, NC 27804

(252)399-9191

bryan@rockymountradiator.com 

http://rockymountradiator.com 

They are equipped to handle your needs and i recommend you to them and Give my name (Tariq Robinson) for a Good deal on service. We will transport the Radiator or Oil Cooler to Bryan Braswell for repairs through our Brokering Division with door to door service to get you back to operations if need be.  Our main focus is reducing the maintenance cost to our inventory fleet at the moment.. Call the office to get professional help and directions to a fast and professional repair. We do professional service on all our trucks, trailers and equipment such as:

• Brakes
• Fuel System Restoration (Fuel Tank Flushing & Fuel filters) 
• Radiator and Oil Cooler Flushing and Testing
• Tires Changing
• Towing 
• Equipment and Vehicle Recovery

Other than a Travel Center Owner repair shop. You have to call for assistance and directions to fixing your vehicle or equipment needs. Call Tajallah Robinson and he will direct you farther to a health vehicle or equipment.

The Travel Center desire to help Owner Operators and Motorist in their travels through North Carolina is far greater than my capabilities and desire at the moment with a mechanic truck. 

MOBILE SERVICE TRUCK CAPABILITIES 

Easy Kleen Commercial 4000 psi 3.5 GPM Hot Water Gas Pressure Washer - Will be used in flushing Radiator exterior and Interior to check for flow and cleaning. It will also be used to wash off grease and oil off the engine or location of work. The idea location is in the Left Vertical Box. To have a Oil Cooler Installed outside to cool the engine if need be

• Wastewater Drain Pan Customized to hold a 5' x 5' Radiator to be Power Washer with Pumps to drain into Waste Oil (275- Gallon Container)
• Waste Water Pump and Pressure Washer Connectors in Rear

Miller Plasm Cuter - Will be used to cut metals to repair or restore. I am looking to install all Aftermarket Parts in Front Vertical Boxes with Tools in hand boxes

• Rear Bumper in Center is a "C"-Clamp Holder to hold Metal Plate for Cutting 
• Concealed in Vertical Boxes if PossibleMiller Multiprocessor Welder - Will be used to weld any type of metals in fabrication of trailers. Or metal beams welding

275-Gallon Water and Recyling Tank will be used for Hot and cold pressure washing purposes

1. Two Tanks will be in the Middle of the Truck Body Both up front. One for Water and other for Pressure Washer Hazmat Drain
2. Wastewater Drain Pan Customized to hold a 5' x 5' Radiator to be Power Washer with Pumps to drain into Waste Oil (275- Gallon Container)

The Makita Cordless 12" Double Bevel Sliding Compound Miter Saw w/XPS Technology - Will be used in cutting lumber and steel products

• The miter saw will be on a pullout tray for cutting purposes
• Installed in Rear Cabinets opposite side of Crane side

The Air Compressor, Generator, Battery Charger and Welder will be  from Miller Welding Technologies and installed by Summit Bodies. This will be 

Custom Summit 10-Series Dual Axle Mechanic Truck

• GVWR: 33,000
• Body Rating: 70,000 ft-lbs
• Body Weight: 5,500 lbs
• Body Length: 14′
• Body Width: 98″
• Body Material: 10 ga galvannealed body shell
• Cardo Deck Width: 54″
• Cargo Deck Depth: 170″
• Cargo Deck Floor: 3/16″  tread plate construction
• Side Pack Height: 40″,50″ or 62″
• Side pack Depth: 22″
• Workbench Bumper Depth: 24″
• Tailgate Height: 12″ H
• Storage Capacity: 222 cu-ft

• GVWR: 33,000
• Ford F-750
• Kenworth T370
• Peterbilt 337
• Freightliner M2 106

• 10 ga. galvannealed steel body construction
• 1/8” aluminum bolt-on doors with an internal frame
• Full-length piano-style aluminum hinges
• Automotive-style bulb weather stripping 
• Ergonomic three-point compression door latches keep compartments sealed tight.
• Aluminum drip rail above compartment doors 
• 3/16” diamond tread plate floor in the cargo area to reduce the risk of slips and falls. 
• Swivel D-ring tie-downs flush-mounted on the cargo area walls
  • 6,000 lbs. Capacity
• A fully integrated crane support structure 
• Tool bumper with storage compartment
  • Integrated bumper steps with grip strut provide slip-resistant access to the cargo area.
  • 2.5” 18,000 lbs automotive-style receiver hitch
• Infinitely adjustable compartment shelves with dividers
• Bright polished knurled grab handles mounted on the rear side packs aid in safe three-point access to the cargo area.
• 12” aluminum slam-style lockable tailgate
• Torch bottle storage compartment 
  • Vented and reinforced floor 
  • Torch bottle retainer with ratchet straps
• Reinforced welder riser mounting blocks on top of DS sidepack
• Safety placards and decals 

• Max Lifting Capacity - 12,000 lb. ( 5400 kg)
• Crane Rating - 66,000 ft-lb. (89.4 kN-m)
• Horizontal Lifting Radius (ret)13′ 7″ (4.14 m) from CL of Crane
• Boom Extension 1st Stage Hydraulic 92″ (233.6 cm) 
• 2nd Stage Hydraulic 92″ (233.6 cm) 
•  Max. Horizontal Reach (ext) 28′ 11 (8.8 m) from CL of Crane
• Boom Elevation-5° to +70° Rope Diameter 7/16″ (1.1 cm)
• Max. Winch Line Pull Speed 60 ft/min (18.2 m/min)
• Max. Single Part Line 6,000 lb. (2721 kg)
• Max. Double Part Line 12,000 lb. (5443 kg)
• Crane Rotation 400° Power
• Mounting Space Requirement - 21″ x 25″
• Controls - Wireless Control System Standard: ASE Phase 4 or Phase 1(ship out cranes only) 

Lifting Capacities

• 12,000 lb. @ 5.5’ (5400 kg @ 1.6 m)
• 11,000 lb. @ 6’ (4990 kg @ 1.9 m)
• 9,950 lb. @ 9’ (3300 kg @ 2.7 m)
• 5,500 lb. @ 12’ (2450 kg @ 3.7 m)
• 4,400 lb. @ 15’ (1950 kg @ 4.6 m)
• 3,650 lb. @ 18’ (1650 kg @ 5.5 m)
• 3,100 lb. @ 21’ (1400 kg @ 6.5 m)
• 2,750 lb. @ 24’ (1200 kg @ 7.6 m)
• 2,400 lb. @ 27’ (1050 kg @ 8.6 m)
• 2,250 lb. @ 29’ (1000 kg @ 9.1 m) 
•  Mounting Space Reqd 21”x 25” (53.3 cm x 63.5 cm)
• Approx. Weight 2,640 lb. (1198 kg)
• ControlsWireless Control System Standard
•  Power Supply Reqd -  PTO & Pump
  8 gpm (30.2 lpm) @ 2800 psi
  All-in-one power unit 

• The three-step AkzoNobel paint process gives the body a high-quality image and durability. 
  • Phosphate wash, epoxy primer, and topcoat.
  • Five-year warranty against rust and corrosion
  • Endless color options 
• Line-X protective coating applied to the cargo area, rear bumper, side pack front, top, rear, and the entire length of the bottom edge of the body provides long-lasting protection from harsh elements.
• Rubberized undercoating applied to the entire underside of the body optimizes durability.

• LED Light Package 
  • Grommeted and flush-mounted
  • Front and rear marker lights
  • Oval stop/tail/turn lights on the rear bumper and headache rack
  • Reverse lights on the rear bumper with a backup alarm
• LED Rectangle work lights 
• LED compartment strip lights
• Control lights from the ASE main control panel, chassis cab panel, and crane remote
• 7-way RV-style trailer plug
• Control lights from control panels in the rear compartment and cab.
• A weatherproof latching main body power panel is installed in the crane compartment.
  • Includes push-button panel to control crane, outriggers, and 12V body accessories, including lights
• Electrical wiring harnesses feature Deutsch connectors and braided protective sleeves.

• Summit designed and manufactured drawer packs.
• .125” aluminum construction
• Heavy-duty 600 lbs. slides fully extended.
• Lock-in & lock-out slides.
• Removable drawers.
• Lock-in drawer dividers are standard, with optional egg crating.
• Lockable single-action handle assembly.
• Drawer depths of  3”, 5”, and 7” 
• Custom widths from 12”-50”.
• Custom riser heights.
• An integrated top shelf with dividers.
• Optional slide-out work tray.
• Wrap or powder coat options add color & durability.
• Cycle, load, shock, impact damage, incline, and vibration tested.

• Open center fixed displacement gear pump.
• PTO mounted to the transmission.
• 32-gal hydraulic reservoir

• Hydraulic-driven reciprocating or rotary screw air compressor
• 40 CFM free air output at 100 psi
• 175 psi max output (reciprocating)
• 150 psi max output (rotary screw)  
• Hannay ½” x 50’ HD spring rewind hose reel 
  • 50’ air hose terminated with ½” male NPT hose end
  • Payout door on the rear of the side pack

Summit Body Paint Description: Super White w/Crane Lifting Caterpillar 1700 Power Rating Generator Out of Library of Congress  Madison Building Basement Tunnel Unto Peterbilt 589 Tri Axle with Reitnouer Big Bubba Step Deck to be Transport 

 TLG Peterbilt Description: 2026 Peterbilt 589 with 36" Flat Top with the following specs: 320" WB, All disc brakes, 3.36 ratio, 605HP / 2050 LB-FT Cummins X15 engine, dual side of cab exhaust, 18-speed manual transmission, 36" Low Roof sleeper with Platinum interior, leather seats, stainless visor, polished aluminum wheels.

Suspension - Air Ride Front and Drive Axle

Number of Rear Axles -  Tandem

Gross Vehicle  - l55,500 lbs. Rating

Steer Axle Weight Rating- 14,000 lbs.

Rear Axle Weight Rating - 46,000 lbs.

Tires - Michelin 16PLY 11R24.5 XLINE ENERGY Z & MN 16PLY 11R24.5 XDS2

Wheels - All Aluminum

Wheelbase - 320"

SPECIALIZED IN REPAIRS & FABRICATION

1. Roadside Service (Cooling System Flushing & Testing)
2. Automotive Mechanic (Light Duty)
3. Heavy Equipment Servicing (Fluids, Radiator Flush, Brakes)
4. Commercial Truck Service (HVAC Flush, Brakes, Fluids)
5. Welding (Trailer Fabrication & Bridge Design)
6. Logistics Shipping (Securing Shipment to be Transported)

FACTORY & AFTERMARKET ITEMS INSTALL 

1. Eye Wash Station
2. Miller Plasma Cuter (L-13.25" / H-9" / W- 5.5")
3. Miller Welder (L- 20.5" / H-12.5" / W-11.25")
4. Hot Pressure Washer (L-46" / H-48" / W-30")
5. 275-Gallon Water Tank (L-40" / H-46" / W-40")
6. Miter Saw (L-32.33" / H-19.5" / W-23")
7. Air Compressor
8. Generator
9. Battery Charger
10. EV Charger
11. 14,000 lbs. Crane
12. Man Basket 2-Person Capacity (L- 36" / H-84" / W-36")

• Welder
• Generator
• Air Compressor
• Hydraulic Pump
• Battery Charger
• Crank Assist

Duston Hansen

Summit Truck Equipment

Southeastern Sales Representative

303-809-8462 - Cell
866-985-3100 - Factory
816-262-9896 - After Hours Service
https://summitbodies.com/

To: Tariq Robinson 

     NJR Trucking 

      1549 Vance Street 

Rocky Mount, NC, North Carolina 27801     

 (252) 903-3751 

Date: 05-22-2025     

Rev: 0 

QUOTE IS VALID FOR 30 DAYS 

Again, I want to thank you for the opportunity to serve your needs. Feel free to contact me directly with any questions at (303) 809-8462

2026 Peterbilt 537 4X2 Summit Series 10 170" Body 

Due on Unit Completion

QTY 

DESCRIPTION 

UNIT PRICE 

LINE TOTAL

Summit 10 Series 14'-2" Body, Summit 12629 Hydraulic Telescopic Crane - 

Rated at 66,000 ft-lbs, Miller Enpak A60GBW, Summit Drawer Package. 

1 Installed On: 

$296,858.00 

$296,858.00 

2026 Peterbilt 537 4X2, Diesel, PX9 / Cummins ISL, Allison 3000/3500 

$296,858.00 + $195.00 FOB Rocky Mount, NC = Total Quote of $297,053.00

TOTAL PRICE 

Please sign below or list PO number(s) to place order for this Equipment DELIV/HNDLG FEE Accepted By:___________________________________ Date______________ DELIVERY

Please e-mail to: dhansen@summitbodies.com 

TOTALINVESTMENT

All quoted prices are subject to change based on parts and materials increases as well as any unforeseen surcharges from our vendors to include transportation. This quote will be repriced if delivery exceeds 150 days from date of signed order. 

*Price does not include any applicable taxes

990 Vernon Rd, 

Wathena, KS 66090 

WWW.Summitbodies.com 

(303) 809-8462 - Mobile 

(866) 985-3100 - OFFICE

Body Construction as follows: 

10ga Galvannealed Steel American Mill - 170" Long 

1/8" Aluminum Doors with Full Length Piano Style Hinges 

Automotive Style Weather Stripping Around all Compartment Doors 

Gas Strut Door Closers 

Compression Latches with Three Point Contact 

22" Deep Side-packs 

Grab Handles Installed on Rear of Body 

54" Wide Cargo Floor 

6000# flush mount swivel D-rings installed in cargo area (three per side) 

12" Aluminum Tailgate 

Driver Side: 

Side-pack - All Compartments 62" High 

D1-D2 Combined: 56" Wide Compartment 

D - 3: 36" Wide Compartment 

Summit Aluminum Drawer Pack with Five(5) 3" Drawers, Two(2) 5" Drawers, and Two(2) 7" Drawer 30'' Wide x 18" Deep - All drawers rated @ 600# and mounted on Lock-in/Lock-out roller slides 

D - 4: 52" Wide Compartment - Over Wheel Well 

Two(2) Adjustable Aluminum Shelves with Dividers 

D - 5: 26" Wide Compartment 

Three(3) Adjustable Aluminum Shelves with Dividers 

Passenger Side: 

Side-pack - 62" High First Three(3) Compartments, Remainder of Compartments 50" High 

P - 1: 36" Wide Compartment 

Combination Compartment with Front Section Reinforced and Vented for Torch Bottles - Includes Bolt-in Tank Retainer and Ratchet Strap 

Three(3) Adjustable Aluminum Shelves with Dividers, Located in Rear of Partitioned Compartment 

P - 2: 36" Wide Compartment 

Three(3) Adjustable Aluminum Shelves with Dividers 

P - 3: 20" Wide Compartment 

Three(3) Adjustable Aluminum Shelves with Dividers 

P - 4: 52" Wide Compartment - Over Wheel Well 

Summit Aluminum Bolt Bin - 21 Bins on dry slides with 5 dividers per bin - 7 wide by 3 tall, and One (1) Pull Out Sorting Tray 

One(1) Adjustable Aluminum Shelf with Dividers 

P - 5: 26" Wide Compartment 

Crane Pedestal, Crane Controls, Body Control Panel, and Air Delivery Components including Air Reel Pay Out Door to Rear of Body 

Electrical Features: 

12v LED Light Fixture in Each Compartment with Switches Installed in Crane Pedestal Compartment Compartment Lights Automatically Turn On When Park Brake Is Set

Magnetic Crane Pendant Storage Monitor 

Wig Wag Warning Light set of 4 - 2 installed on Rear of Compartments and 2 Installed on Front Grill Eight(8) Rectangular LED Work Lights 

Two(2) Installed on Headache Rack Rear Facing 

Two(2) Installed on Top of Side-pack Mid-Body 

Two(2) Installed on Rear of Body Rear Facing 

Two(2) Installed on Crane Boom Tip (Swivel Mount) 

Additional Features: 

Rear Outrigger - Hydraulic Dual Extend 

30" Tool Bumper includes Side Access Step on Passenger Side with Safety Hand Rail, Divided Compartment in Bumper with an Access Door on each Side of Bumper, and Standard Automotive Style 2 1/2" Receiver Hitch 10,000# Maximum Capacity 

Grip Strut on Bumper Step 

Seven way RV style trailer plug 

Wilton 1765 Vise with Mount (Shipped Loose) 

Mount for Wilton 1765 Vise (Shipped Loose) 

One(1) Hose Retainer (Shipped Loose) 

Two(2) Bolt-on J-Hooks (Shipped Loose) 

After Market Backup Camera 

Personnel Bucket Stored in Cargo Area 

Installation of Batteries on Front of Body 

Ratchet Tie-Down System for Bucket 

Crane Summit 12629 Hydraulic Telescopic Crane - Rated at 66,000 ft. Lbs. 

Lift Capacity Rating: 12,000# @ 5' - 5125# @ 13' - 4150# @ 17' - 3175# @ 21' - 2745# @ 25' - 2310# @ 29' Maximum Vertical Lift Height from Crane Base: 30'-6 

Maximum Horizontal Reach from Centerline of Crane: 29' 

Winch Specification: Rope Diameter 7/16" - Line pull speed 60 ft/min 

Rotation: (worm gear) 400 degree Power - Boom Elevation: -5 to + 80 degrees - Traveling Block and Bearing Type Swivel Hook - Proportional Hydraulic System Control 

Weather Proof Radio Control Crane Pendant with Horn Button: 

Dual Joystick Controls - Shock Resistant and Water Proof Casing - Battery Pack Powered by Four(4) AA Batteries - Backup Power Cord - Transmitter Fault Code Display - Weight of Load Pick Display on Remote - Engine Start / Stop Switch - Compressor On / Off Switch - Adjustable Time Out Feature and Accelerometer 

Advanced Safety Electronics: 

Improves Operator Awareness Reducing Risk 

Displays LMI - Load Management Indication 

Promotes Safety By Encouraging Outrigger Deployment 

Increases ROI By Protecting Asset 

Limits Crane Functionality In Unsafe Operating Conditions 

Displays Warning Indicators (Oil Temp, Leveling Condition, Etc.) 

Bright / Easy to Use Control Panel Navigation 

Touch Pad Controls 

Engine Start / Stop 

PTO Engagement

Air Compressor ON / OFF 

Auto Stow Crane Feature 

Optional Novice Mode 

Self-Diagnostic Checks During Boot-Up & Operation 

Hour Meter Display 

Military Grade Switches - Made in USA 

Reduces Wiring & Provides Multiple Auxiliary Ports 

Satellite Control Panel Mounted In Chassis Cab 

Hydraulics: 

Hydrualic Pump Included with All-N-One Unit 

Body Mounted 32 Gallon Hydraulic Reservoir 

Air Compressor and Accessories: 

Air Compressor Included with All-N-One Unit 

Hannay 1/2" x 50' HD spring rewind hose reel equipped with 50' of 250 psi rated air hose, terminated w/ 1/2" male NPT hose end 

1/2" Filter/Lubricator/Regulator installed in compartment w/ air reel 

Air Reel Payout Door, Rear of Crane Pedestal Compartment 

ASME Underbody Approximately 15 Gallon UM Receiver Tank - Mechanical air tank moisture drain 

All-N-One Unit: 

Miller Enpak A60GBHW 

Welder and Welder Accessories: 

Welder Riser (Welder Not Included) 

Paint and Placards: 

Paint Body Single Stage White 

Epoxy Primer Seal for Adhesion 

Rubberized Undercoat Applied to Underside of Body 

Safety Placards and Decals 

Parts and Operations Manuals for All Furnished Equipment 

Bed-Liner Applied To: 

Cargo Area 

Bumper Top and Step 

Lower Edge of Side-packs (Full Length) 

Front of Side-packs (Full Length) 

Rear of Side-packs (Full Length) 

Top of Side-packs (Full Length) 

Wheel Wells

$2,145.00 (USD)

phone Call Us: (252) 451-8216

schedule - 125 Course Hrs

Code GES766

• Overview
• Syllabus
• Requirements
• Instructor
• FAQs

The Welding Technology curriculum provides students with a sound understanding of the science, technology, and applications essential for successful employment in the welding and metalworking industry.. 

Do you like to work with your hands? 

Are you looking for a career where you can do what you love and make good money? 

This online Welder Technician course is an accelerated training package that will provide you the required knowledge and skills you need for success as a welder.

The course provides an intensive overview of the skills necessary for a welder technician to perform the job, including lessons in math, inspection, safety, materials, quality, metal cutting, grinding, forming, robotics, rigging, and welding.

What you will learn

Instruction includes consumable and non-consumable electrode welding and cutting processes. Courses may include math, blueprint reading, metallurgy, welding inspection, and destructive and non-destructive testing providing the student with industry-standard skills developed through classroom training and practical application.

• Welding Safety, Processes, and Applications
• Troubleshooting
• Inspection Methods
• Metallurgy
• Rigging
• Fabrication Processes

How you will benefit

• Prepare for a career as a welder technician
• Gain confidence in your ability to perform your job
• Access to five video-based simulation labs for virtual hands-on experience
• Get the knowledge and skills you need to start your career in an accelerated format
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Prerequisites:

There are no prerequisites to take this course. However, this course requires basic computer skills, including the ability to open and manage windows, navigate websites, and perform common online tasks such as downloading files, completing forms, and using web-based tools.

Graduates of the Welding Technology curriculum may be employed as entry-level technicians in the welding and metalworking industries. Career opportunities also exist in construction, manufacturing, fabrication, sales, quality control, supervision, and welding-related self-employment.

Instructor, Welding 

Building: Building E

Room: 5101

Phone: 252-451-8269 

TRAILER TYPE OF FABRICATION 

• 2025 Reitnouer Big Bubba Tri-Axle 48’   Aluminum Flatbed
• · Business Name in Lights at rear 
• · Oversized Load  Enclosure Box w/Lights in Rear

TYPE OF METAL USED FOR FABRICATION 

• Aluminum     

PURPOSE FOR FABRICATION

• Oversized Enclosed Banner with Lights and Business Name Enclosure with Lights in Rear

GALVANIZED STEEL SQUARE SIGNPOST

· Square Shape Provides Torsional Stability

· 7/16” Holes on 1” Centers Full Length of Post

2” Width  

QUANITY AND PURPOSE

Quantity - __5_

• a) Floor of trailer - Post Welded to Trailer 8’ Length
• b) Right side of trailer welded to floor post – 4’ Length.
• c) Left Side of Trailer to floor Post – 4’ Length
• d) Post on Top of Right and Left Post -8.5’ Length
• e) Post 6” Down from Top Post – 8.5’ Length

Purpose.

Post will be used to hold 8.5’ Enclosed Box with LED Lights Inside with “OVERSIZED” Cut Out Letters 

1/8” ALUMINUM PLATE 4’ x 10’ SMOOTH ON BOTH SIDES (3003)

Aluminum Alloy with Magnesium Added to Make It Much Stronger Than 3003 Series Aluminum. This Grade Has Great Corrosion Resistance and Has the Best Welding Characteristics of All the Aluminum. Uses Include Truck and Trailer Components, Aircraft Components, Boat Hulls, Ladders, Railings, Toolboxes, Kitchen Equipment, Decorative Trim, Sign Blanks, And Any Other Applications That Would Require More Strength Than 3003 Series Aluminum 5052-H32

QUANITY AND PURPOSE

• Quantity - 1 Sheet
• 1st Enclosed Aluminum Box 8.5’ L x 10” W x 1/8” D Back of Enclosed 
• 1st Enclosed Aluminum Box – 8.5’L x 6” W x 1/8” D Top of Enclosed Box
• 1st Enclosed Aluminum Box – _8.5’L x 10” W x 1/8” D Front of Enclosed Box
• 1st Enclosed Aluminum Box -8.5’ L x 6” W x 1/8” D Bottom of Enclosed Box
• 1st Enclosed Aluminum Box – 10” L x 6” W x 1/8” D Right Side of Enclosed Box
• 1st Enclosed Aluminum Box – 10” L x 6” W x 1/8”D Left Side of Enclosed Box

Purpose.

The 1st Enclosed Aluminum Box will be for the “Oversized” Sign

The Enclosed Box will be welded to Galvanized Signpost at the top of post. Level at Top of Signpost

A program that prepares individuals to apply technical knowledge and skills to repair, service, and maintain all types of automobiles.

Includes instruction in brake systems, electrical systems, engine performance, engine repair, suspension and steering, automatic and manual transmissions and drive trains, and heating and air conditioning systems.

Graduates should be prepared to take professional licensure exams and enter careers as entry-level technicians in the transportation industry.

 Summer/Fall 2025 Registration is open and there's still time to enroll!! Register now or visit your advisor to plan your schedule. 

Instructor, Automotive Technologies

Building: Automotive Building CITI Campus

Room: RMMS

Phone: 252-451-7338

Email

Instructor, Automotive Systems Technology

Building: Rocky Mount High School

Room: Rocky Mount High School

Phone: 252-451-8315

Email