2026 Tesla Semi Truck 

Fully Loaded at 82,000 lbs. Gross Combination Weight

• Mile Range Approximately 300 or 500 miles
• 0-60 mph -20 seconds
• Speed Up a 5% Grade - Highway speed limit
• Powertrain - 3 independent motors on rear axles
• Energy Consumption - Less than 2 kWh per mile
• Fast Charging - Up to 70% of range in 30 minutes
• Fuel Savings (est.) - Up to $200,000 over 3 years

Number of Tractors - 4 Autonomous Tractors

Number of Teamsters' (Commercial) - 0 

TRAILERS ASSOCIATE WITH AUTONOMOUS SEMI TRACTOR:

Chassis Trailers - (Intermodal & Shipping Containers)

Dry Van Trailers - (Rail Box Cars, Air Freight)

Open Car Transporter

TRANSPORT TO AND FROM RAIL WAREHOUSES & SEA PORTS

Port New Jersey 

Port New York

Port Baltimore

Port Virginia

Port Wilmington

Port Savannah

Port Jacksonville 

5601 Walkertown Road
Walkertown, NC 27051

Hours of Operation: 24 hours
Days of Operation: 7 days per week

Vin Capacity: 5,404
Railcar Spots: 77
Acreage: 73

999 Wagner Road
Petersburg, VA 23805

Hours of Operation: 24 hours
Days of Operation: 7 days per week

Vin Capacity: 1,893
Railcar Spots: 60
Acreage: 23

2026 Kenworth T680E

Specs

• Class: - 8
• GCWR: - 82,000 lbs.
• Used for: - Local (150 - Mile Radius of Raleigh, NC) Dry Van Service
• Max Horsepower: - 670hp (500kw)
• Front Axle & Suspension: - 14,600 lbs.
• Rear Axle & Suspension: - 40,000 lbs.
• Est Daily Range: - 150 Miles Per Charge
• Minimum Charge Time: - 3 Hours

Number of Tractors - 2 Zero Emissions Tractors

Number of Teamsters' (Commercial)- 1

TRAILERS ASSOCIATE WITH ZERO EMISSION SEMI TRACTOR:

Dry Van - (Palletized Freight and Live Loading Cargo)

Open Car Transporter - Classes 1 thru 5

TRANSPORT TO AND FROM N.J.R. LOGISTICS GROUP WAREHOUSE, RAIL WAREHOUSE & INTERMODAL YARDS

 CSF Intermodal - Carolina Connector (CCX)

5770 Old Battleboro Road
Battleboro, NC 27809

(252) 316-3090

:CSXI_CCX_Ramp@csx.com

Hours of Operation:

Monday-Friday: Open 24 Hours
Saturday-Sunday: 8:00am - 10:00pm
(Gate Crossing ONLY after 7:00pm daily)

 Lift Hours: Monday-Sunday: 8:00am - 7:00pm

This terminal is operated by CSX Intermodal Terminals, Inc. To contact the terminal directly, please dial 252-316-3090.

 CSF Warehouse - Kanban Logistics

614 DANIEL ST EXT

Rocky Mount, NC 27801

Warehouse Contact: Harold Hobgood 

N.J.R. LOGISTICS WAREHOUSE

109 Anchors Way Drive

Edenton, NC 27932

2026 Peterbilt 579EV

Specs

• Class: - 8
• GCWR: - 82,000 lbs.
• Used for: - Local (150 - Mile Radius of Raleigh, NC) Conestoga Drop Deck Service
• Max Horsepower: - 670hp (500kw)
• Front Axle & Suspension: - 14,600 lbs.
• Rear Axle & Suspension: - 40,000 lbs.
• Est Daily Range: - 150 Miles Per Charge
• Minimum Charge Time: - 3 Hours

Number of Tractors - 2 Zero Emissions Tractors

Number of Teamsters' (Commercial)- 1

TRAILERS ASSOCIATE WITH ZERO EMISSION SEMI TRACTOR:

Flatbed - General Freight

Drop Deck Conestoga - General Freight & Vehicles

TRANSPORT TO AND FROM N.J.R. LOGISTICS GROUP WAREHOUSE, RAIL WAREHOUSE & INTERMODAL YARDS

999 Wagner Road
Petersburg, VA 23805

Hours of Operation: 24 hours
Days of Operation: 7 days per week

Vin Capacity: 1,893
Railcar Spots: 60
Acreage: 23

 CSF Warehouse - Kanban Logistics

614 DANIEL ST EXT

Rocky Mount, NC 27801

Warehouse Contact: Harold Hobgood 

N.J.R. LOGISTICS WAREHOUSE

109 Anchors Way Drive

Edenton, NC 27932

2024 Peterbilt 389 Ultra Cab with Stacks with 156 Inch ARI Legacy II RBSDUB Sleeper, X15 Cummins, 565 HP, Eaton 18-Speed, 356 Inch WB. 

Upgraded Sleeper Options Include: All Inclusive Upgraded Interior Décor Package – Antique Slate; Linoleum in Stepwell Area; Blue LED Strip Lighting to Stepwell Treads; Stainless Steel & (2) Clearance Lights to Side Entry Door; 48” Bed Dinette with Self-Storing Table, Self-Storing Cushions, and Bed Struts with (2) Cupholders in Table; Electric Upper Bunk with Mattress & Remote Panel In Place of Rear Overhead Cabinets; Medicine Cabinet with Mirror & Adjustable Shelf; Hardwood Dinette Bases; (2) Pull-Out Drawers in Front Cabinet on PS, Below TV; (3) Pull-Out Drawers in Bottom Cabinet, Next to Refrigerator, in Front of 2nd Water Tank; Hardwood Trim to Roof Vent; Roof A/C with Ducted Air and Heat Strip; Interior A/C Shroud Painted Black to Match Interior Decor; Baseboard Heater 110 Volt; Microwave/Convection Oven; Recessed Single Burner Induction Cooktop;

Specs

• Classes: - 8 
• GCWR: - 57,500 lbs.
• Used for: Local - Line Haul (General Freight)
• Max Horsepower: - 565 hp 
• Front Axle & Suspension: 18,000 lbs.
• Rear Axle & Suspension: - 40,000 lbs.
• Est Range: - 1,575 Miles Per Full Tanks
• Minimum Charge for Full Tank of Fuel: - $1,125.00
• Sleeper Size Configurations: - 156" Side Door

Number of Tractors - 1 Big Sleeper

Number of Teamsters' (Commercial)- 1

RADIUS OF SHIPPING

Coast to Coast

TRAILERS ASSOCIATED WITH

Dry Van

Furniture Van

Open Car Transporter

Enclosed Car Transporter

Flatbed

Conestoga Drop Deck

HOME LOCATION

109 Anchors Way Drive

Edenton, NC 27932

2025 Peterbilt 589 Tri Axle w/Stacks with 17.5' Rock Body, X15 Cummins 605 HP, Eaton 18-Speed 240" Wheelbase

 Brake Type: - AIR 

Body - Heated

Headlights: - LED 

Frame Type: - Double Frame 

Specs

• Classes: - 8 
• GCWR: - 55,500 lbs.
• Used for: Local (Construction & Lawn Care Material)
• Max Horsepower: - 565 hp 
• Front Axle & Suspension: 20,000 lbs.
• Lift Axle: - 20,000 lbs.
• Rear Axle & Suspension: - 46,000 lbs.
• Est Range: - 637 Miles Per Full Tanks
• Minimum Charge for Full Tank of Fuel: - $562.50

Number of Dump Trucks - 1 Mid Roof Sleeper Tractor 

Number of Teamsters' (Commercial)- 1

TRAILERS ACCOCIATED

30-Ton Tag Trailer w/Hydraulic Ramps

RADIUS OF SHIPPING

250-Miles of Rocky Mount, NC

HOME LOCATION

109 Anchors Way Drive

Edenton, NC 27932

Developed by rail shippers for rail shippers, Rail Command® simplifies the complex world of rail logistics, allowing you to improve efficiency, increase visibility, and control costs.

A comprehensive Transportation Management System, Rail Command serves as your all-in-one hub for everything rail. Through a suite of dashboards, reports, and applications, you can track shipments, control fleets, process freight, and produce reports.

From yard management to shipment execution, real-time visibility to rate management, and everything in between, Rail Command is your railcar management solution.

TrinityRail has partnered with BCG (Boston Consulting Group) to produce a report outlining the present state of the rail industry and the innovations poised to alter its future.

A new caliber of cutting-edge digital tools is helping freight rail organizations overcome challenges and amplify advantages.

 Freight_Rails_Digital_Future_is_Just_Around_the_Bend.pdf 

Extended car height for the safe and efficient transportation of taller vehicles such as cargo vans. Compatible with the existing bi-level fleet and features the SealSafe Radial Door®, with additional options for enhanced operational efficiency.

Amount -2

A 66′-0″ gondola available for transporting steel products and other heavy-duty applications. Features a robust top chord and floor, as well as a variety of options to meet the shipper’s needs.

Amount -2

89’-4″ flat cars are available for automotive or general purpose for the transportation of various industrial products.

 Amount -2

Included in our intermodal product line are articulated and stand-alone 53′ well cars.

Amount -2

Included in our flat car portfolio is the 62′ bulkhead car. A variety of options are available.

Amount - 2

Our line of boxcars includes a 60′-9″, Plate F car that offers a variety of options for individual shipper needs.

Amount -2

 The gulfstream G600, manufactured from 2019 - Present, requires a 2-person crew and can transport up to 19 passengers. The aircraft has a maximum operating altitude of 51,000', a normal cruise speed of 600   KTS   /   691   MPH, and a 5,500 NM/6,329 SM seats-full range. The gulfstream G600 has a 5,700' balanced field length and 3,100' landing distance. The cabin measures 06'02" high, 07'07" wide, and 45'02" long. It has a total baggage capacity of 175.00 ft^3; 175.00 ft^3 being internal and 00.00 ft^3 being external.  

 Fifteen (15) Passenger Configuration – 

Sleeps Up to Eight (8) 

Zone 1: Fully Equipped Galley & Galley Annex, Crew Rest & Lavatory 

Zone 2: Four (4) Place Club 

Zone 3: Four (4) Place Dining Table Opposite a Two (2) Place Club 

Zone 4: Two (2) Place Club Opposite a Three (3) Place Divan, Private Lavatory w/Bidet Sprayer 

• Electric Lumber Single Seats 

• Stone Flooring (Galley/Forward Lav ) 

• Quartz Polymer Countertop 

• Espresso Maker, Microwave, Convection Oven 

• Extended Ice & Storage Drawers 

Total Time - 898 Hours

Total Landings - 295

Average Flight - 3 Hours 

 17 passenger VVIP layout. Crew Rest & Forward Lavatory: 3-place divan with 2 TT&L positions plus a fold-down bunk and privacy screen. Three large closets, low side storage and large lavatory.  

Zone 1: Galley with 2 refrigerators, 2 convection ovens, microwave oven, 2 ice drawers, large double basin sink, and china / silverware / stemware storage. Opposite galley is buffet bar with lower storage.  

Zone 2: Forward lounge includes stand-up wet bar with refrigerator, wine chiller and ice drawer. Along starboard side is a 4-place divan and a single passenger seat surrounding two Hi-Lo tables. Port side consists of two 2-place club seats (4 seats total). Above bar facing aft is a 43” ultra-high-definition monitor. 

Zone 3: The aft lounge is located directly adjacent to the forward lounge, and no pass-through access is required. Aft lounge consists of a 5-place “L” shaped divan and a single seat situated on the left surrounding two Hi-Lo tables, opposite retractable 50” ultra-high-definition monitor and two single seats. 

Zone 4: Aft again is the Guest Suite with queen bed, large closet, bench seat with storage beneath and 43” ultra-high-definition monitor. Bathroom with full size shower is directly accessible.  

Zone 5: Master Suite that includes a queen bed with two nightstands, single seat with pull-out table, wardrobe closet, dresser, and a 43” wall mounted monitor. Aft again, the Master Bathroom with lavatory, standup shower, closets and side stowage.  

FERRY RANGE:
6,600 Nautical Miles / 7,595   Standard Miles 

NORMAL CRUISE SPEED:
600 Knots / 691 MPH

MAXIMUM PASSENGERS: - 19 

Operating Cost -  $8,800 per hour. 

Turbine Helicopters 

Year Interior - 2024

Configuration - Corporate

Number of Seats - 7

Soundproofing - Yes

Interior Notes - Corporate Smokey Gray all leather seats, paired with High Visibility Windows & Executive Soundproofing.

The bell 407GX, manufactured from 2010-2014, requires a 1-person crew and can transport up to 6 passengers. The aircraft has a maximum operating altitude of 20,000', a normal cruise speed of 123   KTS   /   142   MPH, and a 275 NM/316 SM seats-full range. The bell 407GX has a 00' balanced field length and 00' landing distance. The cabin measures 04'02" high, 04'09" wide, and 05'00" long. It has a total baggage capacity of 23.00 ft^3; 03.00 ft^3 being internal and 20.00 ft^3 being external.

FERRY RANGE: - 275 Nautical Miles / 316   Standard Miles

NORMAL CRUISE SPEED: - 123 Knots /   142 MPH

MAXIMUM PASSENGERS:
6 

Operating Cost - $2,302 per hour. 

DEPARTMENTS ASSOCIATED WITH:

Freight Forwarding

Construction

Logistics

 2025 Western Star 49X Tri Axle Industrial Roll Back Tri Axle with Stacks with Century ZLA Gold 30 Series 30, Detroit DD-15 525 HP Engine, Eaton Automated 10-Speedl Transmission, 309 Inch WB. 

Specs

• Classes: - 8 
• GCWR: - 66,500 lbs.
• Used for: Local - Recovery and Towing
• Max Horsepower: - 525 hp 
• Front Axle & Suspension: 20,000 lbs.
• Lift Axle: - 20,000 lbs.
• Rear Axle & Suspension: - 46,000 lbs.
• Est Range: - 475 Miles Per Full Tanks
• Minimum Charge for Full Tank of Fuel: - $375.00

DEPARTMENTS ASSOCIATED WITH:

Freight Forwarding

Construction

 2023 Western Star 49X Twi Steer Tri Axle with Stacks with Jerr-Dan 50/60 JFB Gold Series Rotator, X15 Cummins 605 HP Engine, Eaton 18-Speed Manual Transmission, 366 Inch WB.  

Specs

• Classes: - 8 
• GCWR: - 66,500 lbs.
• Used for: Local - Recovery and Towing
• Max Horsepower: - 605 hp 
• Front Twin Axle & Suspension: 40,000 lbs.
• Lift Axle: - 20,000 lbs.
• Rear Axle & Suspension: - 46,000 lbs.
• Est Range: - 475 Miles Per Full Tanks
• Minimum Charge for Full Tank of Fuel: - $375.00

DEPARTMENTS ASSOCIATED WITH:

Freight Forwarding

Heavy Haul

Specialized

Construction

Caterpillar 301.9 Electric Mini Excavator

Battery voltage / capacity: 48 v | 32 kWh
Operating weight: 2.2 metric tons | 4850 lb
Bucket capacity: 0.10 m³ | 0.13 yd³

Run time: up to 8 hours on a single charge*
Charging options: 3 kW max AC overnight charge and 9 kW charging available via Cat DC charger

Caterpillar 906 Electric Compact Wheel Loader

Battery voltage / capacity: 300 v | 64 kWh
Operating weight: 6.2 metric tons | 13,670 lb
Bucket capacity: 1.05 m³ | 1.4 yd³

Run time: up to 8-hour operation with mid shift charge*
Charging options: 6 kW max AC overnight charge (single phase) and 18 kW max charge (three phase)

*Dependent on use and application

Caterpillar 320 Electric Medium Excavator

Battery voltage / capacity: 600 v | 320 kWh
Operating weight: 22–24 metric tons | 48,501–52,911 lb
Bucket capacity: 1.3 m³ | 1.7 yd³

Long single charge run time allows for ability to perform intended work with minimal disruption*

Charging options: 22 kW max AC overnight charge and DC fast charge (CCS2 connector)

*Impacts to operating/charge time include extensive slope/track travel, working in hard/heavy materials, high flow work tool usage and extreme ambient temperatures

*Based on typical utilization and application at a 40% to 60% utilization rate

DEPARTMENTS ASSOCIATED WITH:

Excavation

  SUB-DIVISION SUSTAIN WITH WIND TURBINE FOR EV CHARGING EQUIPMENT

Caterpillar 350 Center Pivot Backhoe

 Net Power - SAE J1349:2011 - 131 hp

Dig Depth - Standard 17 ft

Operating Weight - Maximum 29,321 lbs. 

Caterpillar 815 Soil Compactor w/Blade

 Gross Power (SAE J1995:2014) - 284 hp

 Operating Weight - 49,652 lbs. 

Capacity - 2.69 yd³

Overall Width - 12.3 ft

Heigh - t2.8 ft

Digging Depth - 0.7 ft

Ground Clearance - 2.6 ft 

Cat D8 Tier IV - Stage IV Dozer

 Engine Model - Cat® C15

Power - Net - 363 hp

Operating Weight - 87,083 lbs. 

 Ground Pressure - 7.9 psi

Width of Standard Shoe - 38 in

Blade - LGP Semi-Universal (SU)

Blade Capacity - 12.9 yd³

Cat D5 Tier IV Stage V Dozer

 Engine Model - Cat C7.1

Power - Net - 170 hp

Operating Weight - 42,263 lbs.

Ground Pressure - 4.7 psi

Width of Standard Shoe - 33 in

Blade - LGP VPAT

Blade Capacity - 5.5 yd³  

Cat 340 Tier IV Stage V Large Excavator

 Net Power - ISO 9249 - 346 hp

Operating Weight - 83,100 lbs.

Maximum Digging Depth - 26.9 ft 

Groove 6450-1 All Terrain Crane 

• Nominal capacity - 500 US Tons
• Total gross vehicle weight - 158,730 lbs.
• Main boom length - 197 ft
• Max tip height - 448 ft

Groove 4100L-2 All-Terrain Crane 

• Nominal capacity - 115 US Tons
• Total gross vehicle weight - 105,820 lbs.
• Main boom length - 197 ft
• Max tip height - 292 ft

Caterpillar 140 AWD LVR Motor Grader

 Net Power - EEC 80/1269 250 hp

Operating Weight - Typically Equipped 44,613 lbs.

Blade Width - 12 ft 

Genie® S®-85 HF High Float Telescopic Boom 

Are designed to perform heavy-lifting tasks in sensitive turf conditions, such as sand and turf ground conditions. Engineered to “float” on soft or delicate surfaces, the Genie S-85 HF booms protect softer surfaces during operation that could be damaged by the more aggressive tread on regular rough terrain tires.

Specification Value Max 

Working Height - 91 ft Max 

Horizontal Reach - 72 ft 6 in

Below Ground Reach - 8 ft 8 in

Platform Capacity - 600 lb 

Unrestricted, - 1,000 lb Restricted

Machine Width - 8'6" 

Length - 40 ft 7 in 

DEPARTMENTS ASSOCIATED WITH:

Excavation

   Skyron, 

Our Stacker Crane based ASRS efficiently loads and unloads heavy items, ensuring precise storage. It's highly designed for unit loads; pallet loads with accurate real-time inventory tracking.

From meeting high-density storage needs to accurately managing inventory, Crane-based ASRS makes warehousing efficient & quick.

• Storage
• Picking
• Sequencing

Crane ASRS is ideal for unit loads, achieving high-density storage. It utilizes computer-controlled cranes and automated storage racks which optimizes storage space and enhances warehouse operations efficiently.

 Brochure-May-24.pdf  

 Powering your Business to Move Forward Mobile Robots are equipped with on-board sensors, LiDARs, cameras, barcode readers, etc. that enable them to navigate their environment and interact with multiple objects and people. They are designed to collaborate with humans to perform strenuous and repetitive material movement tasks that maximize the efficiency and productivity of fulfilment operations.  

Autonomous Mobile Robot (AMR) Dynamo is our intelligent mobile robot that is enabled with 2D/3D LiDARs and powered by SLAM algorithms that help it to navigate complex landscapes in warehouses and factories. It adheres to global safety standards like EN 1525:1997 and ANSI/ITSDF B56.5-2019 that ensure safe conditions for workers who interact with these robots. Dynamo comes with a stiff industrial-strength chassis and compact design that make it more rugged and reliable. Dynamo can be configured for multiple warehousing applications like material movement, picking, and sortation. Through advanced AI techniques like machine learning and computer vision, it recognizes and classifies objects, detects obstacles, and makes informed decisions in real-time that accommodate changing workflows and enable high-volume order fulfilment.  

Megalift sidelift container trailer has 77,000 lb. capacity. Easily transfer containers from trailer to trailer, loads or drops containers to and from ground level, and off loads or loads rail cars!

• Fastest possible loading speed with single shot loading
• No need to modify truck or container
• Controlling of multiple SK-R systems remotely with video surveillance system 
• Best possible inhouse logistics cost savings
• Loads standard or custom pallets
• Integrates with ERP, ASRS and warehouse management systems
• 1-2 buffer conveyor integration possibility 
• Handles up to 40 ton in weight
• Automated load forming and truck loading
• Can be used with Simec Auto sight